Infinova' s N3552 and N3752 series provides the ability to transmit 2
digitally encoded video channels with 2-ch audio and 2-ch data over one
optic fiber. Data format supports factory default setting RS-232, DIP
selectable RS-422, RS-485, Manchester or Biphase and contact closure
signal.
Modular in design, the N3552 and N3752 series can be rack-mounted or used as a stand-alone module. Rack mounting requires the N3910 series subrack. Stand-alone module is accomplished with N3910-2S and can be placed on a desktop or mounted to a wall. Features
N3552TA-2A2D-M FO MM TRX, 2V In, 2D IO, 2A IO, Module, 12VDC/24VAC N3552TA-2A2D-R FO MM TRX, 2V In, 2D IO, 2A IO, Card, 2-Slot N3552RA-2A2D-M FO MM TRX, 2V Out, 2D IO, 2A IO, Module, 12VDC/24VAC N3552RA-2A2D-R FO MM TRX, 2V Out, 2D IO, 2A IO, Card, 2-Slot N3752TA-2A2D-M FO SM TRX, 2V In, 2D IO, 2A IO, Module, 12VDC/24VAC N3752TA-2A2D-R FO SM TRX, 2V In, 2D IO, 2A IO, Card, 2-Slot N3752RA-2A2D-M FO SM TRX, 2V Out, 2D IO, 2A IO, Module, 12VDC/24VAC N3752RA-2A2D-R FO SM TRX, 2V Out, 2D IO, 2A IO, Card, 2-Slot
Note: 1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth 2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm and 0.25dB/km @1550nm on SM fiber, and include a 3dB safety factor 3. Range estimates for multimode are based on 1000MHz/km fiber Specifications Video Performance Video Channel: 2 Video Input Impedance: 75 Ohm Video Voltage: 1 V p-p Bandwidth: 5Hz~6.5 MHz Differential Gain: 1% (typical) Differential Phase: 1º (typical) Signal-to-Noise Ratio: 67 dB PCM Encoding: 10 bits Audio Performance Format: 600 Ohm (balanced/unbalanced) (Jumper Selectable) 10 kOhm /47 kOhm (unbalanced) Audio Level: -6 ~ +6 dBm Frequency Response: 10 Hz ~ 20 kHz Signal-to-Noise Ratio: 75 dB Data Performance Data Rate: DC to 115.2 k bps Bit Error Rate: <10-9 Contact Closure Response Time: 50 ms (Active low) Contact Current: 1 A@30 VDC; 0. 5A@125 VAC Optical Performance Fiber Type: Multi-mode Output Power: -12 dBm (typical) Receiver Sensitivity: -19 dBm (typical) Wavelength: 1310/1310nm Connector: ST Fiber Type: Single-mode Output Power: -5 dBm (typical) Receiver Sensitivity: -22 dBm (typical) Wavelength: 1310/1550 nm Connector: FC LED Indicators Power On: Red Optical Link Loss: Red Video Input/Output presence: Green Audio Input/Output presence: Green Data Input/Output presence: Green Power Supply N3921-12D-1: 12 VDC (120 VAC), 10 VA N3921-12D-2: 12 VDC (230 VAC), 10 VA N3921-24A-1: 24 VAC (120 VAC), 20 VA N3921-24A-2: 24 VAC (230 VAC), 20 VA General Parameters Operating Temperature: -40° F ~ 167° F (-40° C ~ 74° C) Storage Temperature: -40° F ~ 185° F (-40° C ~ 85° C) Operating Humidity: 0 ~ 95% RH (non-condensing) Card Dimensions (W x H x D): 1.57" x 4.33" x 6.30" (40 mm x 110 mm x 160 mm) Module Dimensions (W x H x D): 1.69" x 6.18" X 7.32" (43 mm x 157 mm x 186 mm) Power Consumption: 4.9 W Card Weight: 1.21 lbs. (550 g) Module Weight: 2.27 lbs. (1030 g) Mean Time Between Failures: >100,000 Hrs Compliance FCC, CE, ISO 9001:2000
Options:
|
||||||||||||||||||||||||







