CCTV Garage - N3530 & N3730 Series Fiber Optics Video with Data

N3530 N3730 SeriesDigital one video with multi-protocol DIP selectable data

Infinova’ s N3530 and N3730 series provides the ability to transmit one digitally encoded video channel with RS-422 / RS-4485 / Manchester / Biphase data over one or two fibers.
Modular in design, the N3530 and N3730 series can be rack-mounted or used as a stand-alone module. Rack mounting requires the N3910 series subrack chassis. Stand-alone module is accomplished with N3910-1S and can be place on a desktop or mounted to a wall.

Features

Digitally encoded modulation
8 bits digitally encoded video transmission
NTSC, PAL, and SECAM auto compatible
Surface mount technology
On-panel DIP switch selection of RS-422, RS-485 (2 or 4 wires), Manchester/Biphase
On-panel DIP activation of 120 Ohm termination resistor
LED indicators for monitoring of system operating status
Surge protection against transient surge and over voltage
Highest optical dynamic range
Immune to EMI and RFI
Dense structure for easy installation
Hot swappable rack mount cards
Automatic re-settable fuses, short circuit protection
12 VDC power supply
Industry standard connectors
No user adjustments required

Order Info
N3530TA-M FO MM TRX, 1V In, 1D IO, Module, 12 VDC
N3530TA-R FO MM TRX, 1V In, 1D IO, Card, 1-Slot
N3530RA-M FO MM TRX, 1V Out, 1D IO, Module, 12 VDC
N3530RA-R FO MM TRX, 1V Out, 1D IO, Card, 1-Slot

N3730TA-M FO SM TRX, 1V In, 1D IO, Module, 12 VDC
N3730TA-R FO SM TRX, 1V In, 1D IO, Card, 1-Slot
N3730RA-M FO SM TRX, 1V Out, 1D IO, Module, 12 VDC
N3730RA-R FO SM TRX, 1V Out, 1D IO, Card, 1-Slot

Fiber Type	Optical Budget(dB)	Wavelength(nm)	Range(km)
Multi-mode	12	1310/1310	4.4
Single-mode	20	1310/1550	25
Single-mode	*Higher output lasers available for range over 25km

Note:
1. Distance is limited to fiber loss, splices, chromatic dispersion and bandwidth
2. Range estimates are based on 1.0dB/km @ 1310nm on MM fiber, 0.35dB/km @1310nm and
0.25dB/km @1550nm on SM fiber, and include a 3dB safety factor
3. Range estimates for multimode are based on 500MHz/km fiber

Specifications

Video Performance
Video Channel: 1
Video Input Impedance: 75 Ohm
Video Voltage: 1 V p-p
Bandwidth: 5Hz~6.5 MHz
Differential Gain: 1% (Typical)
Differential Phase: 1°(Typical)
Signal-to-Noise Ratio: 67 dB
PCM Encoding: 8 bits

Data Performance
Data Rate: DC to 115.2k bps
Bit Error Rate: <10^-9

Optical Performance
Fiber Type: Multi-mode
Output Power: -15 dBm(typical)
Receiver Sensitivity: -27 dBm(typical)
Wavelength: 1310/1310 nm
Connector: ST
Fiber Type: Single-mode
Output Power: -10dBm(typical)
Receiver Sensitivity: -30dBm(typical)
Wavelength: 1310/1550 nm
Connector: FC

LED Indicators
Power On: Red
Optical Link Loss: Red
Video Input/Output Presence: Green
Data Input/Output Presence: Green

Power Supply
N3921-12D-1: 12 VDC (120 VAC), 10 VA
N3921-12D-2: 12 VDC (230 VAC), 10 VA

General Parameters
Operating Temperature: -40° F ~ 167° F (-40° C ~ 74° C)
Storage Temperature: -40° F ~ 185° F (-40° C ~ 85° C)
Operating Humidity: 0 ~ 95% RH (non-condensing)
Card Dimensions (W x H x D): 0.79" x 4.33" x 6.30" (20 mm x 110 mm x 160 mm)
Module Dimensions (W x H x D): 0.91" x 6.18" X 7.32" (23 mm x 157 mm x 186 mm)
Power Consumption 3.5 W
Card Weight: 0.88 lbs. (400 g)
Module Weight: 1.63 lbs. (740 g)
Mean Time Between Failures >100, 000 Hrs

Compliance
FCC, CE, ISO 9001:2000

Options: