N3586 & N3786 Series POTS Telephone and Modem Interface Transciever

   Infinova’s N3586 and N3786 series provides the ability to transmit and receive a 1-ch POTS or PBX telephone signal with one DIP selectable data (RS-422/RS-485/Manchester/Biphase) over one fiber. Modular in design, the N3586 and N3786 series can be rack-mounted or used as a stand-alone module. Rack mounting requires the N3910 series subrack. Stand-alone module is accomplished with the N3910-1S and can be placed on a desktop or mounted to a wall.

Features:

• Digitally encoded modulation
• Surface mount technology
• POTS or PBX telephone compatible
• Supports 90 V and touch-tone
• RJ-11 jack connector
• 4-pin terminal block data connector
• On-board DIP selection of RS-422, RS-485 (2 or 4 wires), Manchester/Biphase
• Jumper activation of 120 Ohm termination resistor
• LED indicators for monitoring of system operating status
• Surge protection
• Highest optical dynamic range
• Immune to EMI and RFI
• Dense structure for easy installation
• Hot swappable rack mount cards
• Automatic re-settable fuses, short circuit protection
• 24 VAC power supply
• No user adjustments required

Specifications:

Audio Performance	Ringer Voltage	75V RMS typical, 90V RMS maximum
	Ringer Detection Voltage	35V
	Ringer Frequency	17~60 Hz
	Ringer Holdup Time	200 ms
	Feedback Loss	40 dB typical, 30 dB minimum
	Free Channel Signal Noise	75 dB (weighted)
	Balanced	70 dB typical, 60 dB minimum
Data Performance	Data Rate	DC to 115.2 kbps
	Bit Error Rate	<10-9
Optical Performance (Single Mode)	Output Power	-10 dBm (typical)
	Receiver Sensitivity	-30 dBm (typical)
	Wavelength	1310/1550 nm
	Connector	FC
Optical Performance (Multi-mode)	Output Power	-15 dBm (typical)
	Receiver Sensitivity	-27 dBm (typical)
	Wavelength	1310/1310 nm
	Connector	ST
LED Indicators	Power On	Red
	Optical Link Loss	Red
	Call Incoming	Green
	Call Received	Green
	Data Input/Output	Green
General Parameters	Operating Temperature	-40°F ~ 167°F (-40°C ~ 74°C)
	Storage Temperature	-40°F ~ 185°F (-40°C ~ 85°C)
	Operating Humidity	0 ~ 95% RH (non-condensing)
	1-Slot Card Dimensions (W x H x D)	0.79" x 5.08" x 6.57" (20 mm x 129 mm x 167 mm)
	1-Slot Module Dimensions (W x H x D)	0.94" x 6.22" x 7.76" (24 mm x 158 mm x 197 mm)
	Power Consumption	< 5.5 W
	1-Slot Card Weight	0.86 lbs. (0.39 kg)
	1-Slot Module Weight	1.63 lbs. (0.74 kg)
	Mean Time Between Failures	>100,000 Hrs
Certifications	FCC: Part 15 Subpart B (Certificate No.: BCT09HC-715E); CE/EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 (Certificate No.: BCT09HC-714E); ISO 9001:2008
Compliance	UL,cUL

Links:
Datasheet download (PDF)
Manual download (PDF or RAR)