| Model |
FTN-ST |
FTN-AM |
FTN-R |
FTN-RAM |
| Detection
method |
Passive infrared |
| PIR
coverage |
16'5" X 3'3" (5m X 1m) |
| Detection
length limit |
6'7", 16'5" (2 m, 5 m) |
| Detectable
speed |
1' – 4'11"/s (0.3 - 1.5 m/s) |
| Sensitivity |
3.6°F (at 2’/s) (2.0°C (at 0.6 m/s)) |
| Operation
voltage |
9.5 - 18 VDC |
2.5 - 10 V DC |
| Power
input |
- |
3 - 9 V DC (Lithium or Alkaline Battery) |
| Current
draw |
17mA(max.) (at 12 V DC) |
20mA(max.) (at 12 V DC) |
9 uA (at stand-by) /
3mA (max.)(at 3 V DC) |
10 uA (at stand-by) /
3mA (max.)(at 3 V DC) |
| Alarm
period |
2.0 ±1.0sec. |
| Warm-up
period |
Approx. 60 sec. (LED blinks) |
Approx. 120 sec. (LED blinks) |
| Alarm
output |
N.C./N.O. Selectable 28 V DC 0.1 A (max.) |
N.C./N.O. Selectable-Solid State Switch
10 V DC 0.01 A(max.) |
| Trouble
output |
N.C. 28 V DC 0.1 A (max.), open when the
cover is removed. |
N.C./N.O. Selectable-Solid State Switch
10 V DC 0.01 A(max.) |
| LED
indicator |
Light/Blink: Warm-up, alarm, masking
detection (FTN-AM only) |
Enable: During DIP switch 1 (WALK TEST
MODE) or DIP switch 4 (LED) ON
Disable: During normal operation
Light/Blink: Warm-up, alarm, masking detection (FTN-RAM only) |
| Operation
temperature |
-4 - +140°F (-20 - +60°C) |
| Environment
humidity |
95% max. |
| Weatherproof |
IP55 |
| Mounting |
Wall (Outdoor, Indoor) |
| Mounting
height |
2'7" – 3'11" (0.8-1.2 m) |
| Weight |
3.5 oz. (100 g) |
6.7 oz. (190 g) |
| Accessories |
screw (3X20 mm) X 2 |
Connector for POWER and ALARM,
connector for TROUBLE, plate nut X 2,
screw (M3X10 mm)X2, screw (3X20 mm)X4, sponge for transmitter |
