Power Supply with direct output
and built-in battery charging circuit
DynaLock 5500 Series Power Supply offers the
reliability of solid state electronics, versatility
of field selectable voltage output, and flexibility
of modular design. Use direct power output or
choose one of the available expansion boards.
Specify a distribution board (DB5 / DB10) for 5
or 10 individual fused outputs. Add individual
control modules for switched outputs, with or
without time delay. Specify the interlock logic
board (ILB) option for a 4 DPDT relay board.
Optional fire alarm control (FAC) relay provides
integration with fire or emergency alarm
system. A battery charging circuit is standard.
Specify 4 or 7 amp hours, and 12 or 24 volts
for battery backup.
The DynaLock 5500 Power Supply provides
clean, filtered, and regulated DC voltage.
Specify for all electronic devices, including
access controls, electromagnetic locks, and
CCTV.
- Filtered and Regulated Voltage Output
- Field Selectable 12 or 24 VDC.
- 3A at 12VDC / 2A at 24VDC
- Up To 10 Fused Outputs
- Fire Alarm Tie-In
- Battery Back-Up
- Built-in Charging Circuit
- Hinged Cover Enclosure: Off-white finish with
conduit knockouts and optional key lock cover. Dimensions
4”x12”x15”.
- Lifetime Warranty: Made in the USA by DynaLock,
with over 20 years experience in the manufacture of
electromagnetic locks.
Specifications:
| Enclosure |
4” x 12” x 15” Steel |
| Weight |
14.00 lb (average) +
approx. 6 lbs. per 1 battery |
| Color |
Off-white |
| Input
Fuse |
1A 3AG Slo Blo |
| Output
Fuses |
Battery/DC Output - 5A 3AG Slo Blo |
| DB
Fuses |
Self-Resetting when powered down for 2 minutes |
| Basic
Outputs |
Capacity 10 AWG |
| Module
Outputs |
Capacity 14 AWG |
| Anti-Tamper
Switch1 |
Yes / No |
| Battery
Back-up2 |
Yes / No |
| Cable
Kit3 |
Yes / No |
| Distribution
Board4 |
Yes / No |
| Control
Module5 |
Yes / No |
| Fire
Alarm Module6 |
Yes / No |
| Interlock
Logic Board7 |
Yes / No |
| Key
Locked Cover8 |
Yes / No |
| Power
Cord9 |
Yes / No |
1
Signals opening of enclosure cover
2 BBU1-4 Battery Back-up - 4 AH at 12VDC, 1
battery
BBU1-7 Battery Back-up - 7 AH at 12VDC, 1 battery
3 For third party batteries (Included at no
charge with all BBU options)
4 DB5 - Distribution Board - 5
zone fused, accepts up to 5 CM or CMTD modules.
DB10 - Distribution
Board - 10 zone fused, accepts up to 10 CM or CMTD modules.
5 CM - Control Module - Plug-in
(Requires DB5 or DB10)
CMTD - Control Module
w/Time Delay - Plug-in, 0-80 second relock delay (Requires DB5 or
DB10).
6 FAC - Fire Alarm Module -
Plug-in (One per supply).
FACMR - Fire Alarm
Module with Manual Reset.
7 Four DPDT relays
8
Includes two keys
9 Six foot, pre-connected, 3-wire line cord with
ground
